SuperTILLER

DEPTH, MIXING & STUBBLE MANAGEMENT

100-380 hpPower

40cmDepth

3,00 a 6,00mWorking Width

High performance tine mounted cultivator, available in 2 or 3 rows, with a width of work of 3.00 to 6.00m that allows working up to 40cm deep.

A simple, lightweight, spacious and robust frame construction offers impressive working capacities with large amounts of crop residues and stubble, with exceptional results in all types of conditions, especially in the harshest.

SOIL TILLAGE WITHOUT PLOUGH

More than 15 years ago, Vomer committed to developing alternative technologies to plowing, that is how the first chisel and semi-chisel with tines fully designed by Vomer were born.

Nowadays, it is widely use practice, according to data from the European Community and the soil preparation without the soil loosening accounts for over 42% of the cultivable land, and in some cereal crops that number can go up to 60%.

Vomer offers tilling equipment and technologies, of great reliability and performance, for the latest tilling trends, divided in three ranges, according to the customer necessities.

SuperTILLER

Depth

Depth and stubble works with no conditions

The SuperTILLER is a mounted cultivator with high performance tines configured in 3 rows. The use is intended for works that require deeper work and effective management of crop residues and stubble. Especially in first tasks, it allows breaking and doing vertical work up to 40cm while maintaining low power requirements.

The SuperTILLER favors the incorporation and decomposition of stubble by creating a deeper layer of soil prepared for further work.

Performace

Design with advantages

Designed entirely by Vomer, the SuperTILLER is built with one of the strongest and lightest arms in its class, which together with the non-linear Non- Stop system, allows us a work capacity that is difficult to match, and one of the best in its class.

On the other hand, the frame design combines excellent stiffness with low weight, thanks to the use of high-strength materials and smart design solutions. The modular design allows us to have different work and compaction options for the same equipment, even exchanging them throughout the campaign.

Reliability

Building for the professional farmer

Like other Vomer equipment, the SuperTILLER cultivator is made of high-strength steel and it incorporates hi- ghly reliable components, thanks to which we can increase reliability and minimize adjustments and maintenance.

The arms and the Non-Stop system gua- rantee a continuous work without worries about maintenance or misalignments. The robust and simple depth adjustment sys- tem provides advantages in use campaign after campaign. An cultivator to work tirelessly and save operating costs.

SuperTILLER Tine (4th Generation)

The fourth generation of our most resistant and versatile tine, completely redesigned, with the most noticeable change being the external coverage, with a cleaner design. The new tine arm now supports more lateral load and the main movement increases the life of the equipment in 50%. The guarantee against breaking of the tine-arms of 10 years speaks of the quality of the components.

Double high-load Spring

Underbeam Clearance: 82cm

Maximum force: 750Kg

Maintenance free

10 Years - Arm Fracture Warranty

High capability

The natural terrain of the SuperTILLER is the most intense works, that’s where the difference is made. The separation and distribution of the tines make jams disappear when we work with large amounts of stubble, especially corn.

The SuperTILLER uses very effectively the power of the tractor, this is where other chisels fail, this means that a tractor with less power is able to work under equal conditions, or on the contrary, with the same power, fuel consump- tion is less; this is Efficiency.

High resistance frame

The SuperTILLER has an extremely robust, resis- tant and light frame, which ensures a long life of the equipment, even in continuous and hard works. In addition, with a low weight, maneuvers and transport are safer.

A modular design allows us to have different works and compaction options available under the same frame. Few greasing points makes lower maintenance.

Folded Packer (3,00m)

Opcionally the SuperTILLER 30 can incorporate the automatic packer folding system.

In all the field tests we have observed that our SuperTILLER does not offer great difficulties for less powerful tractors to perform perfectly when working with the implement. On the other hand, despite having one of the lightest sets on the market, transport is compromised with this type of tractor.
The objective is to reduce the weight of the rear part, bringing the roller closer to the tractor. For this we have designed one of the simplest and most effective systems to solve this problem. The folding system uses two small pistons to folding the packer for transport, these same hydraulic pistons allow automatic depth control, a simple and effective idea.
What does all this mean in numbers? Well, we add just 20kg of the folding system, and we obtain an effect of lightening 600kg in the transport.

TECHNICAL FEATURES

Main frame section in 100x100 with High strength steel in the differents parts.
Vertical folding system in 3 parts, with a roller in 2 sections that provides a uniform compaction.
Adjustment of the working depth with CLIPs. System that offers a very fast, reliable and precise adjustment, it also distributes the weight on the frame in a better way.
The frame in 3 files are build with an tine distribution that improves the behavior Equipment-Tractor. This distribution prevents the accumulation of residues, but guarantees a great power of mixing due to the soil being in the machine for a longer time.
Leveling harrows with continuous adjustment by spindle.

info